|
ReliaSoft
uses minor version "service releases" to add features and resolve
any issues with the software. These updates are free to registered
users and this page allows you to download the most recent service
release for BlockSim 7.
We recommend
that you check this Web site occasionally to make sure that you
are always running the most up-to-date version of the software that
is available.
 |
| Current
Version of BlockSim |
 |
 |
|
Compile Release Version |
Build Date |
|
7.0.4 |
07/09/08 |
|
To determine the Compile Release Version (CRV)
of the application on your computer, select
About from the Help menu. |
|
![]() |
|
|
Prior
Versions |
|
If you have not yet upgraded from
BlockSim 6 Standard/FTI
click here to obtain the last service release
for that version (click
here for BlockSim 1.0/1.5).
Prior versions have been retired but are still
supported
by ReliaSoft.
Click here to review some of the new and enhanced
features in version 7 or
click here to order the upgrade.
|
|
Single-User License |
|
If you have a single-user license for
BlockSim 7, please
download and install the following service release.
|
|
Network License |
|
If you have a network license for
BlockSim 7,
please download and install the following service
release on each client computer. NOTE: In
order for the client application to work properly,
the current version of the Network User Management
Console must have been installed on the server
by the network administrator. To download the most
recent version of the network console,
click here...
|
|
|
Downloading and Installing Service Releases
To download the installation program, right-click
the link and select Save Target As (or the
equivalent command for your browser) from the shortcut
menu.
Remember to close all other applications before
running the installation.
For Windows NT, 2000 or XP, you must be logged in
with a user account that has administrative rights
while performing the installation.
Contact ReliaSoft's
Technical
Support Engineers with questions or concerns.
|
|
|
| |
|
Modifications
and Enhancements to
BlockSim 7 |
|
The modifications/enhancements for each service release
are described next. This information is also available
in the ReadMe file that is installed with the software.
The most
recent service release (build) contains all previous
modifications.
Build 7.0.4
Modifications
- Added the "Use
Probability of Failure for Static Blocks"
option in the User Setup.
- Added simulation
plots to the plot types available in the
MultiPlot.
- Added an "Add
block" menu option in the Item Properties
Table.
- Resolved an issue
with optimization of multiple blocks.
- Resolved an issue
with maintenance phases losing the link to
the Maintenance Template Sheet
during export.
- Resolved an issue
with duty cycles and preventive maintenance
and inspections on item age
not working properly.
- Resolved an issue
with preventive maintenance and inspections
on item age not working
properly through interrupted phases.
- Resolved an issue
associated with Type I restoration factors.
- Resolved an issue
in simulation details where contained blocks
did not show the name of the
container for the phase view (not overall).
- Resolved an issue
with phase simulation when a matching multi
block was in series in a
diagram but in parallel in a Maintenance
Template Sheet (or otherwise).
- Modified the
behavior for inspection on item age with a
restoration factor of 0. Inspections
on item age with a restoration factor of 0
will be performed at intervals, as opposed
to
only when the item reaches that age. Note
that this modification may result in
significant
changes in simulation results.
- Accelerated
calculations for large fault tree diagrams.
Build 7.0.3
Modifications
- Made improvements in the speed of
simulating a Phase Diagram.
- Resolved an issue with variable
throughput, specifically when bottlenecks
existed in the diagram.
- Resolved an intermittent issue for mean
and interval mean availability system point
results not being calculated right.
- Resolved an issue with maximum capacity
and uptime utilization not being displayed
correctly in the simulation results.
- Added new simulation plots: Cost, Mean
Availability, System Failures and
Throughput.
- Added support for ALTA 7.
- Added language support for French.
Build 7.0.2
Modifications
- Added language support for German,
Portuguese and Chinese.
- Added the ability to enable an
inspection to bring an item or system down
for contained blocks.
- Added multiple block properties to
analytical equations legend.
- Resolved a simulation issue where a
block with a mixed-weibull distribution and
a combination of the parameters caused an
overflow error.
- Resolved various other minor issues.
Build
7.0.1
Modifications
|
|
|
|
Version 7
